# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/wks,101wx001.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: WKS 101WX001 10.1" WXGA TFT LCD panel

description:
  The WKS 101WX001 is a 10.1" WXGA (1280 x 800) TFT LCD panel with a 24-bit RGB
  parallel data interface.

maintainers:
  - Robert Chiras <robert.chiras@nxp.com>

allOf:
  - $ref: panel-common.yaml#

properties:
  compatible:
    const: wks,101wx001

  label: false
  port: true

  vcc-supply:
    description: 5v analog power regulator

  blctr-gpios:
    description: GPIO used for BL_CNTR pin, controlling the panel backlight
                 (this is not a pwm backlight, it's only a GPIO controlled
                 backlight)
    maxItems: 1

  pinctrl-assert-gpios:
    description: Default states for various gpios used as selectors for on-board
                 muxes

required:
  - compatible
  - port

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    panel {
      compatible = "wks,101wx001";
      blctr-gpios = <&gpioa 5 GPIO_ACTIVE_HIGH>;
      pinctrl-assert-gpios = <&gpiob 3 GPIO_ACTIVE_LOW>,
                             <&gpiob 4 GPIO_ACTIVE_LOW>,
                             <&gpiob 6 GPIO_ACTIVE_LOW>,
                             <&gpiob 7 GPIO_ACTIVE_LOW>,
                             <&gpiob 8 GPIO_ACTIVE_LOW>;

      port {
        panel_in: endpoint {
          remote-endpoint = <&lcdif_out>;
        };
      };
    };
