.\"SPDX-License-Identifier: GPL-2.0-or-later
.\" Copyright Nikolai Kondrashov <spbnick@gmail.com>
.TH usbhid-dump "8" "February 2012" "usbutils-VERSION" "Linux USB Utilities"
.IX usbhid-dump
.SH NAME
usbhid-dump \- dump USB HID device report descriptors and streams
.SH SYNOPSIS
.B usbhid-dump
[OPTION]...
.SH DESCRIPTION
.B usbhid-dump
uses
.B libusb
to dump report descriptors and streams from HID (human interface device)
interfaces of USB devices.  By default, it dumps HID interfaces of all
connected USB devices, but could be limited to a subset of them, or to a single
interface, using options.

NOTE: usbhid-dump detaches kernel drivers from the interfaces it dumps and uses
them exclusively, so no other program receives the input in the meantime.  The
report descriptor dumping is instantaneous, but the stream dumping continues
until terminated with SIGINT (^C from the terminal) or a timeout expires.

If you accidentally start dumping a stream from the USB keyboard you use to
control the terminal, the system will stop receiving the input and you won't
be able to terminate usbhid-dump. Just stop your input and wait until the
timeout expires. The stream dumping will stop, the keyboard will be
reattached to the kernel driver and you will regain control.

The default stream dumping timeout is 60 seconds and could be changed with the
-t option.
.SH OPTIONS
.TP
.B -h, --help
Output a help message and exit.
.TP
.B -v, --version
Output version information and exit.
.TP
.B -s, -a, --address=bus[:dev]
Limit interfaces by bus number and device address. Both 1-255, decimal.
Zeroes match any bus or device.
.TP
.B -d, -m, --model=vid[:pid]
Limit interfaces by device vendor and product IDs. Both 1-FFFF, hexadecimal.
Zeroes match any vendor or product.
.TP
.B -i, --interface=NUMBER
Limit interfaces by number (0-254), decimal. 255 matches any interface.
.TP
.B -e, --entity=STRING
The entity to dump: either "descriptor", "stream" or "all". The value can be
abbreviated down to one letter. The default is "descriptor".
.TP
.B -t, --stream-timeout=NUMBER
Stream interrupt transfer timeout, ms. Zero means infinity. The default is
60000 (60 seconds).
.TP
.B -p, --stream-paused
Start with the stream dump output paused.
.TP
.B -f, --stream-feedback
Enable stream dumping feedback: print a dot to stderr for every transfer
dumped.
.SH SIGNALS
.TP
.B USR1/USR2
Pause/resume stream dump output.
.SH OUTPUT FORMAT
.B usbhid-dump
outputs dumps in chunks. Each chunk is separated by an empty line and starts
with the following header line:

BUS:DEVICE:INTERFACE:ENTITY TIMESTAMP

Here, BUS, DEVICE and INTERFACE are bus, device and interface numbers
respectively. ENTITY is either "DESCRIPTOR" or "STREAM". TIMESTAMP is
timestamp in seconds since epoch.

After the header the actual dump data follows as hex bytes. A descriptor
chunk includes the whole report descriptor. Every stream chunk includes a
whole report, usually, but if a report is bigger than endpoint's
wMaxPacketSize, it will span several chunks.
.SH EXAMPLES
.TP
Dump report descriptor for a device with address 3 on bus number 2:
.B usbhid-dump -a 2:3

.TP
Dump report stream for a device with vendor ID 0x5543 and product ID 0x0005:
.B usbhid-dump -m 5543:0005 -es

.TP
Dump report descriptor from interface 1 of a device with vendor ID 0x5543:
.B usbhid-dump -m 5543 -i 1 -ed

.TP
Dump report streams from all HID interfaces of all USB devices (caution: you will lose control over the terminal if you use USB keyboard):
.B usbhid-dump -es

.SH AUTHOR
Nikolai Kondrashov <spbnick@gmail.com>
